_r__200-200_.png?x-oss-process=style/png_small)
FTTH Drop Cable Manufacturer
Flat FTTH drop cable with two parallel FRP strength members and LSZH sheath, 1-4 fibers G.657A1/A2, for the final drop from distribution point to subscriber.
Steel Wire FTTH Drop Cable
Flat FTTH drop cable with steel wire strength members and black LSZH sheath for higher-tension drop spans in FTTH networks.
ADSS Fiber Optic Cable Manufacturer
All-dielectric self-supporting ADSS fiber optic cable with FRP central member, aramid yarn strength and PE or AT sheath, 2-288 fibers, for aerial installation on power and telecom pole routes.
Figure 8 Fiber Optic Cable - Multi Loose Tube
Multi loose tube figure 8 aerial cable with steel or FRP central member, corrugated steel tape armor and PE jacket for self-supporting aerial installation.
GYXTW Fiber Optic Cable Manufacturer
Armored central loose tube GYXTW cable with corrugated steel tape and two parallel steel wire strength members, 2-24 fibers, for duct and aerial use.
GYFTA Fiber Optic Cable Manufacturer
Non-metallic multi loose tube GYFTA cable with FRP central strength member and single PE or LSZH jacket for duct and aerial routes.
GYTS Fiber Optic Cable Manufacturer
Armored multi loose tube GYTS cable with corrugated steel tape over the cable core and PE or LSZH jacket for duct and aerial networks.
GYTA53 Fiber Optic Cable Manufacturer
Double jacket GYTA53 direct-buried fiber optic cable with APL inner sheath and corrugated steel (PSP) armor for moisture and rodent protection.
Indoor Tight Buffered Fiber Optic Cable
2-24 fiber tight buffered indoor distribution cable with aramid yarn strength and PVC or LSZH jacket for building and data center cabling.
Indoor Breakout Fiber Optic Cable
2-12 fiber indoor breakout cable with 2.0 mm subunits around an FRP central strength member and LSZH jacket for riser and horizontal runs.
Armored Fiber Optic Patch Cable - Simplex
Simplex armored fiber optic patch cable with SUS flexible spring tube and LSZH or PVC jacket for protected fiber links.
MTP MPO Trunk Cable Manufacturer
MTP/MPO trunk cable with single jacket micro type construction, 2-24 cores in OS2 single-mode or OM3/OM4 multimode for data center cabling.
Anchor Clamp for ADSS & OPGW Cable | Pole Anchor / Dead-End Clamp | Uni-fiber
Anchor clamp for anchoring ADSS and OPGW cable on wooden, concrete and steel poles. Heavy-duty grip with corrosion-resistant construction.
Dead End Clamp for Fiber Optic Cable | ADSS & OPGW Dead-End Fitting | Uni-fiber
Dead end clamp (terminal fitting) for ADSS, OPGW and aerial fiber optic cable. Supports preformed and bolt-type designs for secure cable termination.
_r__1620-2160_c__392a24_.jpg?x-oss-process=style/small)
Pole Bracket for Aerial Fiber Optic Cable | Pole Mounting Bracket OEM | Uni-fiber
Pole bracket for mounting aerial fiber optic cable fittings on wooden, concrete and steel poles. Galvanized steel, custom sizes available.
Drop Cable Clamp for FTTH Drop Cable | FTTH Cable Clamp OEM | Uni-fiber
Drop cable clamp for FTTH flat and figure-8 drop cable. Secures the drop cable at poles and walls for a tidy, reliable FTTH installation.
_r__1279-1706_c__b2a48d_.jpg?x-oss-process=style/small)
Cable Support for Fiber Optic Cable | Cable Support Bracket OEM | Uni-fiber
Cable support bracket for routing and securing fiber optic and telecom cable on poles and walls. Corrosion-resistant construction, custom dimensions.
LC Duplex Fiber Optic Patchcord
LC Duplex fiber optic patchcord in OM3/OM4 multimode or OS2 singlemode for high-density patching.
LC Duplex Fiber Optic Patchcord
LC Duplex fiber optic patchcord in OM3/OM4 multimode or OS2 singlemode for high-density patching.
LC Duplex Fiber Optic Patchcord
LC Duplex fiber optic patchcord in OM3/OM4 multimode or OS2 singlemode for high-density patching.
LC Duplex Fiber Optic Patchcord
LC Duplex fiber optic patchcord in OM3/OM4 multimode or OS2 singlemode for high-density patching.
OPGW Fiber Optic Cable - Aluminum Clad Steel Tube
OPGW (Aluminum Clad Steel Tube) – fiber optic ground wire combining ACS strength wires with an optical fiber unit for transmission-line lightning protection and communications.
OPGW Fiber Optic Cable - Central Stainless Steel Tube
OPGW (Central Stainless Steel Tube) – welded stainless steel tube protects the fibers; ACS wires provide strength and fault-current path.
OPGW Fiber Optic Cable - High Fiber Count
High Fiber Count OPGW – central or stranded-tube design sized for more fibers while meeting line mechanical and electrical duties.
GYFTY Fiber Optic Cable
GYFTY – all-dielectric loose-tube outdoor fiber optic cable for duct and aerial routes where no metallic element is permitted.
GYTC8S Fiber Optic Cable
GYTC8S – figure-8 self-supporting outdoor fiber optic cable with an integrated messenger for direct aerial installation.
ASU Fiber Optic Cable
ASU – all-dielectric self-supporting unitube fiber optic cable for aerial FTTH and access deployment.
GYTA Fiber Optic Cable Manufacturer in China
GYTA fiber optic cable is an outdoor, loose-tube optical cable with an aluminum tape (APL) moisture barrier. It is commonly used in duct and direct-burial outdoor fiber networks. Uni-Fiber manufactures GYTA and can produce it to customer specification.
LC-LC Fiber Patch Cord Manufacturer in China
LC-LC fiber patch cord is a fiber optic jumper terminated with LC and LC connectors. Uni-fiber supplies it and can build it to customer specification.
LC-SC Fiber Patch Cord Manufacturer in China
LC-SC fiber patch cord is a fiber optic jumper terminated with LC and SC connectors. Uni-fiber supplies it and can build it to customer specification.
SC-SC Fiber Patch Cord Manufacturer in China
SC-SC fiber patch cord is a fiber optic jumper terminated with SC and SC connectors. Uni-fiber supplies it and can build it to customer specification.
FC-LC Fiber Patch Cord Manufacturer in China
FC-LC fiber patch cord is a fiber optic jumper terminated with FC and LC connectors. Uni-fiber supplies it and can build it to customer specification.
OPGW Cable, Optical Fiber Composite Overhead Ground Wire Manufacturer
OPGW (Optical Ground Wire) is a composite overhead ground wire that carries both the earth-wire function of a transmission line and an optical fiber communication path.
Tension Clamp for ADSS & OPGW Cable | Manufacturer & Custom OEM | Uni-fiber
ADSS and OPGW tension clamp (anchor / dead-end clamp) for utility poles. Firm cable holding with corrosion-resistant materials, customized to your cable outer diameter.
Suspension Clamp for ADSS & OPGW Cable | J-Hook Type, Custom OEM | Uni-fiber
J-hook type suspension clamp for ADSS and OPGW aerial lines. Supports the cable at intermediate poles while limiting bending stress and vibration.
Central Loose Tube Dielectric Cable - GYXTY, Single Jacket, Duct/Aerial
2 to 24 fibers OM1, OM2, OM3, OM4 multimode or OS1/OS2 (ITU-T G.652D) single-mode, 250 µm single loose tube, non-metallic non-armored internal/external fiber optic cable with glass yarns strength members and a PE or LSZH jacket.
Central Loose Tube Armored Cable - Steel Tape with E-glass, Anti-Rodent
2 to 24 fibers OM1, OM2, OM3, OM4 multimode or OS1/OS2 (ITU-T G.652D) single-mode, 250 µm single loose tube (SLT), metallic corrugated steel tape armored (STA), external rodent resistant duct and direct burial cable with glass yarns strength members, and polyethylene (PE) or LSZH jacket.
Figure-8 Fiber Optic Cable - Central Loose Tube, Self-Supporting Aerial
2 to 24 fibers OM1, OM2, OM3, OM4 multimode or OS1/OS2 (ITU-T G.652D) single-mode, 250 µm single loose tube, metallic corrugated steel tape (CST) armored, outdoor self-supporting aerial fiber cable. The messenger section is made up of stranded wires as the supporting part, completed with a polyethylene (PE) sheath to form a figure-8 structure.
Air-Blown Fiber Optic Cable Manufacturer
Air-blown micro fiber optic cable engineered for microduct blowing installation, enabling flexible network upgrades and FTTH rollout.
2-Core FTTH Drop Cable
2-core flat FTTH drop cable with FRP strength members and LSZH sheath for residential and enterprise fiber-to-the-home connections.
4-Core FTTH Drop Cable
4-core flat FTTH drop cable with FRP strength members and LSZH sheath, supporting multi-service home and business drop installations.
Figure 8 FTTH Drop Cable 2-Core
Self-supporting figure 8 FTTH drop cable with integrated messenger, for 2-core aerial drop installation between buildings and poles.
Figure 8 FTTH Drop Cable 4-Core
Self-supporting figure 8 FTTH drop cable with integrated messenger for 4-core aerial drop installation in FTTH access networks.
MPO MTP Trunk Assembly 8-Core
8-core MPO/MTP trunk patch assembly on micro cable for high-density data center interconnect and 40G/100G breakout.
MPO MTP Trunk Assembly 12-Core
12-core MPO/MTP trunk patch assembly on micro cable for parallel optics and high-density structured cabling.
MPO/MTP Trunk Cable Assembly - 24 Cores, Ferrule Type
MPO/MTP Trunk cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduced cable management troubles.
LC Duplex Fiber Optic Patchcord
LC Duplex fiber optic patchcord in OM3/OM4 multimode or OS2 singlemode for high-density patching.
SC Duplex Fiber Optic Patchcord
SC Duplex fiber optic patchcord in OM3/OM4 multimode or OS2 singlemode for high-density patching.
Fiber Optic Patchcord - FC Duplex, OM3/OM4/OS2
FC duplex fiber optic patchcord in OM3/OM4 multimode or OS2 single-mode for equipment and panel connections where a screw coupling is preferred.
Fiber Optic Patchcord - Hybrid LC/SC, OM3/OM4/OS2
Hybrid LC/SC fiber optic patchcord in OM3/OM4 multimode or OS2 single-mode, terminated with an LC connector at one end and an SC connector at the other.
LC Fiber Optic Pigtail
LC fiber optic pigtail with 900um tight buffered fiber for splicing onto drop cables and ODF terminations.
Fiber Optic Patch Cable - Round Duplex, PVC/LSZH
Round duplex fiber optic patch cable containing two 900 µm tight buffered fibers under a PVC or LSZH jacket with aramid yarn strength members.
SC Fiber Optic Pigtail
SC fiber optic pigtail with 900um tight buffered fiber for splice closures, boxes and ODF termination.
Fiber Optic Patch Cable - Zip Duplex, PVC/LSZH
Zip duplex fiber optic patch cable contains two 900um tight buffer fibers under the PVC or LSZH jacket with aramid yarn strength members. It is with figure-8 structure.
Micro Tube PLC Splitter
Micro tube PLC splitter for compact FTTH distribution points, providing 1:N optical power splitting in minimal space.
Fiber Optic Patch Cable - Simplex, 900um, PVC/LSZH
Simplex fiber optic patch cable contains one 900um tight buffer fiber under the PVC or LSZH jacket with aramid yarn strength members.
Armored Fiber Optic Patch Cable - Round Duplex, SUS Tube, LSZH
Round duplex armored fiber optic patch cable containing two 900 µm tight buffered fibers, a SUS flexible spring tube, aramid yarn strength member and PVC or LSZH jacket.
ABS Box PLC Splitter
ABS box packaged PLC splitter for rack or wall mounting in FTTH and PON distribution networks.
Armored Fiber Optic Patch Cable - Zip Duplex, SUS Tube, LSZH
Zip Duplex Armored Fiber Optic Patch Cable contains 2 cores 900um tight buffer fibers, SUS flexible spring tube, aramid yarn strength member and PVC or LSZH jacket. It is with Figure 8 structure.
Insert Type PLC Splitter
Insert type PLC splitter for direct installation in fiber distribution boxes and splice closures.
Fiber Optic Distribution Frame
Optical distribution frame for central office and cabinet fiber termination, splice and patch management.
Fiber Optic Faceplate
Fiber optic face plate is also called as end user faceplate. This model is designed to be wall-mount installed, with SC/FC/LC optic adapter to fix with pigtails or FTTH drop cable.
Fiber Optic Distribution box (FDB)
To joint armored optical cable and FTTH Cable in FTTH access network. Available to be outdoor wall-mounted and pole-mounted.
Horizontal Splice Enclosure
Horizontal splice enclosure is a complete, hermetically sealed splice enclosure designed for ease of assembly and re-entry. It can be used in aerial, pedestal and underground applications.
Dome Splice Enclosure
Dome splice enclosure is a complete, hermetically sealed splice enclosure designed for ease of assembly and re-entry. It can be used in aerial, pedestal and underground applications.
Optical Fusion Splicer
Fusion splicer with small size, light weight and high reliability for field fiber splicing, with an all-in-one fixture covering multiple fiber types, jumpers and insulated wires.
OTDR
OTDR for measuring the physical characteristics of optical fiber and locating event points and fault points along the fiber line.
暂无数据.No Data.
