1 to 4 fibers G.657A1 or G.657A2 250um fiber unit
is positioned in the centre. Two parallel Fiber
Reinforced Plastics (FRP) or Steel wires are placed at
two sides. Then the cable is completed with a black or white LSZH sheath.
1 to 4 fibers G.657A1 or G.657A2 250um fiber unit
is positioned in the centre. Two parallel Fiber
Reinforced Plastics (FRP) or Steel wires are placed at
two sides. A steel wire as the additional strength
member is also applied Then the cable is completed with a black LSZH sheath.
OM1,OM2,OM3,OM4 multimode or
OS1/OS2 (ITU-T G.652D) singlemode 250um fibers
are positioned in a PBT loose tube. Tubes & Fillers (If
necessary) are standed around a FRP central
strength member into a compact and circular cable
core. The cable core is filled with the
filling compound to protect it from water ingress,
over which a PE inner sheath and aramid yarn strength
members. The cable is completed with a PE outer sheath.
OM1,OM2,OM3,OM4 multimode or
OS1/OS2 (ITU-T G.652D) singlemode 250um fibers
are positioned in a PBT loose tube. Tubes & Fillers (If
necessary) are standed around a steel wire or FRP central
strength member into a compact and circular cable
core.The Corrugated Steel Tape (CST) is longitudinally
applied over the cable core. The cable is completed
with Polyethylene (PE) jacket .
OM1,OM2,OM3,OM4 multimode or
OS1/OS2 (ITU-T G.652D) singlemode 250um fibers
are positioned in a PBT loose tube. Tubes & Fillers (If
necessary) are standed around a FRP central
strength member into a compact and circular cable
core. The cable is completed with Polyethylene (PE)
or LSZH jacket.
2 to 24 fibers OM1,OM2,OM3,OM4 multimode or
OS1/OS2 (ITU-T G.652D) singlemode 250um Single
loose tube metallic Corrugated Steel Tape (CST)
armored outdoor rodent resistand duct or aerial
cables with two steel wire strength members each
side, and Polyethylene (PE) or LSZH jacket.
OM1,OM2,OM3,OM4 multimode or
OS1/OS2 (ITU-T G.652D) singlemode 250um fibers
are positioned in a PBT loose tube. Tubes & Fillers (If
necessary) are standed around a steel wire or FRP central
strength member into a compact and circular cable
core.The Corrugated Steel Tape (CST) is longitudinally
applied over the cable core. The cable is completed
with Polyethylene (PE) jacket or LSZH.
OM1,OM2,OM3,OM4 multimode or
OS1/OS2 (ITU-T G.652D) singlemode 250um fibers
are positioned in a PBT loose tube. Tubes & Fillers (If
necessary) are standed around a steel wire or FRP central
strength member into a compact and circular cable
around the cable core. An Aluminium Polyethylene (APL) is
applied around the cable core,which is filled with the
filling compound to protect it from water ingress,
over which with a thin PE sheath is applied. After the PSP
is longitudinally applied over the inner sheath, the cable
is completed with a PE outer sheath.
2 to 24 fibers OM1,OM2,OM3,OM4 multimode or
OS1/OS2 (ITU-T G.652D) singlemode900um tight buffer
fibers, aramid yarn and PVC or LSZH jacket form the
Indoor Tight Buffered Distribution Fiber Optic Cable.
2 to 12 fibers OM1,OM2,OM3,OM4 multimode or
OS1/OS2 (ITU-T G.652D) singlemode900um tight buffer
fibers, aramid yarn and PVC or LSZH jacket form the
Subunit cable. Subunits are standed around a FRP
(Central Strength Member) with a longitudinal swellable
tape under the outer jacket.
Round Duplex Armored Fiber Optic Patch Cable contains 2 core
900um tight buffer fibers, SUS flexible spring tube,
Aramid yarn strength member and PVC or LSZH jacket.
ABOUT US
Shenzhen Uni-fiber Optical Cable Co., Ltd (Uni-fiber) is a trusted worldwide provider for fiber optic components and FTTH products. Uni-fiber designs, manufactures and markets all kinds of fiber optic cables for outdoor and indoor communication transmission solutions. The company offers ADSS, OPGW, FTTH drop cable, fiber optic assembly and all installation accessories.
With more than 20-years′ experience, Uni-fiber has been growing to a leading Chinese manufacturer and exporter of fiber optic products around the world, including Spain, France, America, Peru, UAE, Saudi Arabia, Malaysia, Philippines and so on. Before the shipment, all products must undergo three quality control procedures: Raw material inspection, production finish quality control test and well packaged inspection. Apart from high-quality products, Uni-fiber also provides customers with comprehensive technical support and after sale services to ensure their network systems stably.
At Uni-fiber, we keep innovating and devoting to build a networked future linking people together.
* Customizable: Whether you need indoor or outdoor optical fiber products, Uni-fiber have you covered. Not only do we offer normal ones, but we are able to produce the customizable items.
* Prompt response: Uni-fiber customer
service team provides prompt and detailed response to inquiries and any
questions.
WHY UNI-FIBER?
* A-class fibers: A-class fiber is with flexibility, high efficiency and stability. Upgrading the network equipment, A-class fibers would be a reliable choice.
* Precision inspection:
At Uni-fiber, we understand the importance of creating a reliable network. That’s why we offer only quality products for you.