Fiber Optic Cable Catalog | ADSS, OPGW, FTTH, Outdoor

FTTH Drop Cable Manufacturer

Flat FTTH drop cable with two parallel FRP strength members and LSZH sheath, 1-4 fibres G.657A1/A2, for the final drop from distribution point to subscriber.

Steel Wire FTTH Drop Cable

Flat FTTH drop cable with steel wire strength members and black LSZH sheath for higher-tension drop spans in FTTH networks.

ADSS Fiber Optic Cable Manufacturer

All-dielectric self-supporting ADSS fiber optic cable with FRP central member, aramid yarn strength and PE or AT sheath, 2-288 fibres, for aerial installation on power and telecom pole routes.

Figure 8 Fiber Optic Cable - Multi Loose Tube

Multi loose tube figure 8 aerial cable with steel or FRP central member, corrugated steel tape and PE jacket for self-supporting aerial installation.

GYFTA Fiber Optic Cable Manufacturer

Non-metallic multi loose tube GYFTA cable with FRP central strength member and single PE or LSZH jacket for duct and aerial routes.

GYXTW Fiber Optic Cable Manufacturer

Armoured central loose tube GYXTW cable with corrugated steel tape and two parallel steel wire strength members, 2-24 fibres, for duct and aerial use.

GYTS Fiber Optic Cable Manufacturer

Armoured multi loose tube GYTS cable with corrugated steel tape over the cable core and PE or LSZH jacket for duct and aerial networks.

GYTA53 Fiber Optic Cable Manufacturer

Double jacket GYTA53 direct-buried fiber optic cable with APL inner sheath and corrugated steel (PSP) armour for moisture and rodent protection.

Indoor Tight Buffered Fiber Optic Cable

2-24 fibre tight buffered indoor distribution cable with aramid yarn strength and PVC or LSZH jacket for building and data centre cabling.

Indoor Breakout Fiber Optic Cable

2-12 fibre indoor breakout cable with 2.0mm subunits around an FRP central strength member and LSZH jacket for riser and horizontal runs.

MTP MPO Trunk Cable Manufacturer

MTP/MPO trunk cable with single jacket micro type construction, 2-24 cores in OS2 singlemode or OM3/OM4 multimode for data centre cabling.

Armored Fiber Optic Patch Cable - Simplex

Simplex armored fiber optic patch cable with SUS flexible spring tube and LSZH or PVC jacket for protected fiber links.

Cable Support for Fiber Optic Cable | Cable Support Bracket OEM | Uni-fiber

Cable support bracket for routing and securing fiber optic and telecom cable on poles and walls. Corrosion-resistant construction, custom dimensions.

Dead End Clamp for Fiber Optic Cable | ADSS & OPGW Dead-End Fitting | Uni-fiber

Dead end clamp (terminal fitting) for ADSS, OPGW and aerial fiber optic cable. Supports preformed and bolt-type designs for secure cable termination.

Pole Bracket for Aerial Fiber Optic Cable | Pole Mounting Bracket OEM | Uni-fiber

Pole bracket for mounting aerial fiber optic cable fittings on wooden, concrete and steel poles. Galvanized steel, custom sizes available.

Drop Cable Clamp for FTTH Drop Cable | FTTH Cable Clamp OEM | Uni-fiber

Drop cable clamp for FTTH flat and figure-8 drop cable. Secures the drop cable at poles and walls for a tidy, reliable FTTH installation.

Anchor Clamp for ADSS & OPGW Cable | Pole Anchor / Dead-End Clamp | Uni-fiber

Anchor clamp for anchoring ADSS and OPGW cable on wooden, concrete and steel poles. Heavy-duty grip with corrosion-resistant construction.

Suspension Clamp for ADSS & OPGW Cable | J-Hook Type, Custom OEM | Uni-fiber

J-hook type suspension clamp for ADSS and OPGW aerial lines. Supports the cable at intermediate poles while limiting bending stress and vibration.

Tension Clamp for ADSS & OPGW Cable | Manufacturer & Custom OEM | Uni-fiber

ADSS and OPGW tension clamp (anchor / dead-end clamp) for utility poles. Firm cable holding with corrosion-resistant materials, customized to your cable outer diameter.

OPGW Cable, Optical Fiber Composite Overhead Ground Wire Manufacturer

UNI-FIBER OPGW (Optical Fiber Composite Overhead Ground Wire) integrates overhead earth wire and optical fiber communication. Suitable for 110kV / 220kV / 500kV high-voltage transmission lines. Available in stainless steel tube & aluminum tube designs. Lightning resistant & short-circuit proof. Custom fiber cores, complete OPGW hardware kits. Factory direct supply for power projects.

LC-SC Fiber Patch Cord Manufacturer in China

LC-SC fiber patch cord is a fiber optic jumper with an LC connector at one end and an SC connector at the other. It is commonly used as a hybrid patch cord to link high-density LC panels with SC ports. Uni-Fiber supplies LC-SC patch cords and can build them to customer specification.

SC-SC Fiber Patch Cord Manufacturer in China

SC-SC fiber patch cord is a fiber optic jumper terminated with SC connectors at both ends. The SC connector has a 2.5 mm ferrule and a square push-pull body, widely used in ODFs and telecom equipment. Uni-Fiber supplies SC-SC patch cords and can build them to customer specification.

FC-LC Fiber Patch Cord Manufacturer in China

FC-LC fiber patch cord is a hybrid fiber optic jumper with an FC connector at one end and an LC connector at the other. FC uses a 2.5 mm ferrule with a screw-on coupling for stable, vibration-resistant connections. Uni-Fiber supplies FC-LC patch cords and can build them to customer specification.

LC-LC Fiber Patch Cord Manufacturer in China

LC-LC fiber patch cord is a fiber optic jumper terminated with LC connectors at both ends. LC is a small-form-factor (SFF) connector widely used in high-density data center and telecom patching. Uni-Fiber supplies LC-LC patch cords and can build them to customer specification.

GYTA Fiber Optic Cable Manufacturer in China

GYTA fiber optic cable is an outdoor, loose-tube optical cable with an aluminum tape (APL) moisture barrier. It is commonly used in duct and direct-burial outdoor fiber networks. Uni-Fiber manufactures GYTA and can produce it to customer specification.

GYFTY Fiber Optic Cable

GYFTY – all-dielectric loose-tube outdoor fiber optic cable for duct and aerial routes where no metallic element is permitted.

GYTC8S Fiber Optic Cable

GYTC8S – figure-8 self-supporting outdoor fiber optic cable with an integrated messenger for direct aerial installation.

ASU Fiber Optic Cable

ASU – all-dielectric self-supporting unitube fiber optic cable for aerial FTTH and access deployment.

OPGW Fiber Optic Cable - Central Stainless Steel Tube

OPGW (Central Stainless Steel Tube) – welded stainless steel tube protects the fibers; ACS wires provide strength and fault-current path.

OPGW Fiber Optic Cable - High Fiber Count

High Fiber Count OPGW – central or stranded-tube design sized for more fibers while meeting line mechanical and electrical duties.

OPGW Fiber Optic Cable - Aluminum Clad Steel Tube

OPGW (Aluminum Clad Steel Tube) – fiber optic ground wire combining ACS strength wires with an optical fiber unit for transmission-line lightning protection and communications.

Fiber Optic Distribution Frame

Optical distribution frame for central office and cabinet fiber termination, splice and patch management.

Insert Type PLC Splitter

Insert type PLC splitter for direct installation in fiber distribution boxes and splice closures.

ABS Box PLC Splitter

ABS box packaged PLC splitter for rack or wall mounting in FTTH and PON distribution networks.

Micro Tube PLC Splitter

Micro tube PLC splitter for compact FTTH distribution points, providing 1:N optical power splitting in minimal space.

LC Fiber Optic Pigtail

LC fiber optic pigtail with 900um tight buffered fiber for splicing onto drop cables and ODF terminations.

SC Fiber Optic Pigtail

SC fiber optic pigtail with 900um tight buffered fiber for splice closures, boxes and ODF termination.

LC Duplex Fiber Optic Patchcord

LC duplex fiber optic patchcord in OM3/OM4 multimode or OS2 singlemode for SFP transceivers and high-density patch panels.

SC Duplex Fiber Optic Patchcord

SC duplex fiber optic patchcord in OM3/OM4 multimode or OS2 singlemode for equipment and ODF connections.

Fiber Optic Patchcord - FC Duplex, OM3/OM4/OS2

Optic fiber Patchcord is a fiber optic cable assemblied at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment. Its thick layer of protection is used to connect the optical transmitter, receiver, and the terminal box.

Fiber Optic Patchcord - Hybrid LC/SC, OM3/OM4/OS2

Optic fiber Patchcord is a fiber optic cable assemblied at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment. Its thick layer of protection is used to connect the optical transmitter, receiver, and the terminal box.

MPO MTP Trunk Assembly 8-Core

8-core MPO/MTP trunk patch assembly on micro cable for high-density data centre interconnect and 40G/100G breakout.

MPO MTP Trunk Assembly 12-Core

12-core MPO/MTP trunk patch assembly on micro cable for parallel optics and high-density structured cabling.

MPO/MTP Trunk Cable Assembly - 24 Cores, Ferrule Type

MPO/MTP Trunk cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. With MPO or US Conec MTP connectors, it is optimized for 40G QSFP+ SR4/CSR4,100G QSFP28 SR4 optics direct connection and high-density data center applications.

Figure 8 FTTH Drop Cable 2-Core

Self-supporting figure 8 FTTH drop cable with integrated messenger for 2-core aerial drop installation between buildings and poles.

Figure 8 FTTH Drop Cable 4-Core

Self-supporting figure 8 FTTH drop cable with integrated messenger for 4-core aerial drop installation in FTTH access networks.

2-Core FTTH Drop Cable

2-core flat FTTH drop cable with FRP strength members and LSZH sheath for residential and enterprise fibre-to-the-home connections.

4-Core FTTH Drop Cable

4-core flat FTTH drop cable with FRP strength members and LSZH sheath, supporting multi-service home and business drop installations.

Air-Blown Fiber Optic Cable Manufacturer

Air-blown micro fiber optic cable engineered for microduct blowing installation, enabling flexible network upgrades and FTTH rollout.

Figure-8 Fiber Optic Cable - Central Loose Tube, Self-Supporting Aerial

2 to 24 fibres OM1, OM2, OM3, OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode, 250 µm single loose tube, metallic corrugated steel tape (CST) armored, outdoor self-supporting aerial fiber cable. The messenger section is made up of stranded wires as the supporting part, completed with a polyethylene (PE) sheath to form a figure-8 structure.

Central Loose Tube Dielectric Cable - GYXTY, Single Jacket, Duct/Aerial

2 to 24 fibers OM1,OM2,OM3,OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode 250um Single loose tube non-metallic non-armoured internal/external fiber optic cables with glass yarns strength members, and PE or LSZH jacket.

Central Loose Tube Armored Cable - Steel Tape with E-glass, Anti-Rodent

2 to 24 fibres OM1, OM2, OM3, OM4 multimode or OS1/OS2 (ITU-T G.652D) singlemode, 250 µm single loose tube (SLT), metallic corrugated steel tape armored (STA), external rodent resistant duct and direct burial cable with glass yarns strength members, and polyethylene (PE) or LSZH jacket.

Armored Fiber Optic Patch Cable - Zip Duplex, SUS Tube, LSZH

Zip Duplex Armored Fiber Optic Patch Cable contains 2 cores 900um tight buffer fibers, SUS flexible spring tube, Aramid yarn strength member and PVC or LSZH jacket. It is with Figure 8 structure.

Armored Fiber Optic Patch Cable - Round Duplex, SUS Tube, LSZH

Simplex Armored Fiber Optic Patch Cable contains 1 core 900um tight buffer fiber, SUS flexible spring tube, Aramid yarn strength member and PVC or LSZH jacket.

Fiber Optic Patch Cable - Simplex, 900um, PVC/LSZH

Simplex fiber optic patch cable contains one 900um tight buffer fiber under the PVC or LSZH jacket with aramid yarn strength members.

Fiber Optic Patch Cable - Zip Duplex, PVC/LSZH

Zip duplex fiber optic patch cable contains two 900um tight buffer fibers under the PVC or LSZH jacket with aramid yarn strength members. It is with Figure 8 structure.

Fiber Optic Patch Cable - Round Duplex, PVC/LSZH

Round Duplex Fiber Optic Patch Cable contains two 900um tight buffer fibers under the PVC or LSZH jacket with aramid yarn strength members.

Optical Fusion Splicer

It is featured with small size, light weight, high reliability, greater environmental adaptability, dust-resistant, water-resistant and shock-resistant & high temperature-resistant. The all-in-one fixture meets fusion demands of multiple optical fibers, jumpers and>rubber-insulted wires with a cladding diameter of 80～150μm.

OTDR

OTDR is mainly used to measure physical characteristics of optical fiber. It can also accurately locate the event point and fault point along the optical fiber line. It has two USB interfaces, which can connect to the external U disk , or communicate with PC through SyncActive software.